Sign in with Facebook
  • Facebook Page: 128172154133
  • Twitter: EarthProtect1

Posted by on in Solar
  • Font size: Larger Smaller
  • Hits: 2410
  • 0 Comments

Solar and Heat Design From MIT Does Double Duty


MIT researchers say a hybrid solar-thermoelectric system they’re working on would provide a big advantage over conventional solar cells or solar thermal systems, particularly for household use: the ability to produce heat and electricity simultaneously. They propose accomplishing this mean feat through a clever reconfiguration of the standard parabolic trough

In a typical parabolic system (like the one pictured below), a curved mirror reflects sunlight onto a liquid-filled tube, and the hot water produced in that tube is used either to drive a turbine to produce power, or for heat for industrial uses or space heating. The MIT team — Professor Evelyn Wang and grad student Nenad Miljkovic — is working on hybridizing the system to do both at once by modifying that tube with a series of concentric tubes within it.

 

 

MIT researchers say a hybrid solar-thermoelectric system they’re working on would provide a big advantage over conventional solar cells or solar thermalsystems, particularly for household use: the ability to produce heat and electricity simultaneously. They propose accomplishing this mean feat through a clever reconfiguration of the standard parabolic trough.

In a typical parabolic system (like the one pictured below), a curved mirror reflects sunlight onto a liquid-filled tube, and the hot water produced in that tube is used either to drive a turbine to produce power, or for heat for industrial uses or space heating. The MIT team – Professor Evelyn Wang and grad student Nenad Miljkovic – is working on hybridizing the system to do both at once by modifing that tube with a series of concentric tubes within it.

Their first tube-within-the-tube would contain the thermoelectric material, which would take advantage of a temperature gradient to produce power. This thermoelectric system would have pretty low efficiency, the researchers say – but that’s OK, because homes generally don’t need too much electricity. They need some, but they need a lot more heat – and the MIT design produces that by using an even narrower tube at the center of their device containing what’s called a thermosiphon. This is a device that “draws heat away from the ‘cold’ part of a thermoelectric system,” according to MIT, “passively transferring heat from the thermoelectric cold side and alleviating the need to pump cooling fluid as in a conventional parabolic-trough system.”

The heat carried away by the thermosiphon could then be used to heat water for, well, hot water, but also space heating and industrial processes.

Abraham Kribus, a professor of mechanical engineering at Tel Aviv University in Israel who was not involved in this research, told MIT that in their paper on their work, Wang and Miljkovic describe a “a fresh approach to solar energy conversion” but that some questions remain – as would be expected. “This is the situation at early stage with every nonconventional idea,” Kribus said. “Overall, the paper shows a nice start and a very capable team behind it.”

http://mit.edu/solardecathlon/design.html

 

0

Comments

81595f2dd9db45846609c618f993af1c

© Earth Protect